...
| 1 | You need to define at least 2 deck cross-sections along the deck. | ||
| 2 | Navigate to Cross > Internal Cross-frame K Top | 3Deck > Cross Section |  |
| 3 | Click three-dots icon on Support Line cell and set Abut1 and Abut4 Support Lines with no longitudinal offsets. | ||
| 4 | Navigate to Deck Cross Section tab. |  | |
| 5 | Pick the Girders for haunch locations. | ||
| 6 | Enter the following data for each Deck Cross Section. Total Width [in]: 502 |  | |
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| 1 | Go to Cross Section under Deck on the tree view. |
| 2 | Copy Location, Deck Cross Section from model inputs and paste into OpenBrIM. |
| Tip |
|---|
The Cross Section that have been created are illustrated below. |
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Deck Cross Section | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Location | Deck Cross Section | ||||||||||
|
| ||||||||||