| Info |
|---|
Follow the next steps to set material data to be used in this BDS project |
Table 1: Materials
...
Go to Materials from tree view.
Click “Materials DB” button.
Click on the MaterialsDB checkbox in combobox and import.
...
...
Check that the Materials database are imported.
...
| Info |
|---|
Follow the next steps to set rebar data to be used in this BDS project. |
Table 2: Rebars
...
Go to Rebars from tree view.
Click “Rebar DB” button.
Click on the RebarDB checkbox in combobox and import
...
...
Assign material type to imported rebars
...
| Info |
|---|
Follow the next steps to set Load Classes data to be used in this BDS project. |
Table 3: Load Classes
...
Go to Load Classes from tree view.
Self Weight load is already defined. Click the “Add” button to define another load class.
...
...
Set Live Load Reduction condition and types of all Load Classes
...
| Info |
|---|
Follow the next steps to set Load data to be used in this BDS project. |
Table 4: Loads
...
Go to Loads from tree view.
Click “Load DB” button.
Click on the “PassangerVechiles” checkbox in combobox and import.
...
...
If you want to enter a user defined load, click the "Add" button.
Name, Load Class, Type and Magnitude data must be entered for each adding "Load".
...
| Info |
|---|
Follow the next steps to set Load Combination Table data to be used in this BDS project. |
Table 5: Load Combination Table
...
Go to Load Combination Table from tree view.
Click “Combination DB” button.
Click on the “D+F” checkbox under Service Limit State in combobox and import.
...
...
If you want to enter a user defined Load Combination, click the "Add" button.
Enter load factor data for the load combination
...
| Info |
|---|
Follow the next steps to import Drawing Files to be used in this BDS project. |
...
Please follow below instructions to import Drawing Files |
Table 1: Drawing Files
| 1 | Go to Navigate 'Drawing Files' from tree view. You can To save the selected file to BDS by , click the "'Open" ' button. |   |
| Tip |
|---|
The “Properties” part is completed in this step. You can proceed to the “Stories“ section. |