...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Follow the next steps to define construction of bridge components. |
...
From Loading/Construction/Superstructure, click Girder Erection (Complete).
...
...
Select Stage and Bridge.
...
Proceed with Superstructure Attachment Construction.
...
...
Name the cell.
...
| Info |
|---|
After clicking on ‘Construction> Superstructure Construction> Girder/Cross Frame Erection' in the navigation treeview, follow the steps to define the Girder/Cross Frame Erection. You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| Expand | ||
|---|---|---|
| ||
| Girder Erection (Complete) [SIG] |
| 1 | 🖱️ Click three-dots icon on Stage cell and select a Construction Stage as GirderStage. |
| ||||
| 2 | As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the bridge is define in the next step. |  | ||||
| 3 |
| |||||
...
| |||||
...
| ||||
...
| |||||
Go to Girder Erection (Complete) under Superstructure on the tree view.
Copy Girder Construction from model inputs and paste into OpenBrIM.
...
Girder Erection (Complete)
Girder Construction
| 4 | 🖱️ Click the three-dots icon on the Bridge cell, and then set BRG1. |
|
| 5 | 🖱️ Keep the Splice Load and Stiffener/Gusset Plate Load and Girder Self Weight Factor as default. |
|
| 6 | Proceed to the next step to verify the model. | |
| Anchor | ||||
|---|---|---|---|---|
|
| Tip |
|---|
The completed girder/cross frame erection is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips. |
...
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |
...