Versions Compared

Version Old Version 2 New Version Current
Changes made by

Orkun Gülel (Unlicensed)

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

OpenBrIM uses roadway data while performing influence surface based live load analysis.

Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor#DEEBFF

Follow the next steps to add roadway to the project.

...

Go to Roadway on the tree view.

...

...

Select Bridge.

...

Info

After clicking on ‘Superstructure Attachments> Roadway’ in the navigation treeview, follow the steps to define the Roadway. You can use the collapsed documentation page below for more information on the explanations of each parameter.

Expand
titleRoadway
Roadway [SIG]
1

🖱️ Click the three-dots icon on the Bridge cell, and then set BRG1.

image-20240929-085316.pngImage Added

2

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the Roadway dimensions are set in the next step.

Image Added

3

Insert excerpt
_Quick Tips
_Quick Tips
nameIssue
nopaneltrue

4

🖱️ Click three-dots icon on Roadway Dimensions and click Edit.

Image RemovedImage Removed

image-20240929-085400.pngImage Addedimage-20240929-085436.pngImage Added

45Keep the lane dimensions and asphalt thickness on the Roadway tab
5

Enter start & end stations and left & right widths.

🖱️Enter the Station as 0.

image-20240929-085523.pngImage Added

6

🖱️ Keep the Transverse Offset as default.

Image Removed
Image Added

6
7

Follow the steps below to match the same inputs as illustrated model.

7

Go to Roadway under Superstructure Attachments on the tree view.

8

Copy General, and Roadway from model inputs and paste into OpenBrIM.

Tip

     Completed Roadway is illustrated below.

...

Expand
titleQuick Tip

Copy the desired data with the automatic copy button in the upper left corner.

Click on the first cell in and use the Ctrl+V shortcut to paste.

Image RemovedImage Removed

Roadway

General

Code Block
R1	BR1	[[0, 0, 216, 216, 0],[6360, 0, 216, 216, 0]]

Roadway

Code Block
R1	12	20	0.75	2

Roadway Dimensions(Spreadsheet)

Code Block0 0 18 18 0 530 0 18 18 0

🖱️Enter the Right Width and Left Width as 18.

Image Added
8

🖱️ Keep the Skew as default.

9

🖱️ Move to the second row.

🖱️Enter the Station as 530.

Image Added
10

🖱️ Keep the parameters of the Roadway 3D tab and the remaining parameters of the General tab as default

image-20240929-085648.pngImage AddedImage Added
11

Road dimensions may vary depending on the station.

You can refer to the Quick Tip below to see how to define road dimensions based on the station.

12

Insert excerpt
_Quick Tips
_Quick Tips
nameRoadwayDimensions
nopaneltrue

13

When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM.

Image Added
14

Proceed to the next step to verify the model.

Anchor
Photo
Photo

Tip

The completed roadway is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.

Insert excerpt
_Quick Tips
_Quick Tips
nameModelButton
nopaneltrue

...

Tip

To view the entire procedure explained on this page, please watch the recorded Video below.

Roadway.mp4