| 1 |  🖱️ Click the three-dots icon on the Girder cell, and then set G4 G1.
|  Image Removed Image Added
|
| 2 | As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the bolt property is set in the next step. |
| 3 | | Insert excerpt |
|---|
| _Quick Tips |
|---|
| _Quick Tips |
|---|
| name | Issue |
|---|
| nopanel | true |
|---|
|
|
| 4 | 🖱️ Go to the Bolt category. |  |
| 5 | 🖱️ Click the three-dots icon on the Web Bolt Property cell, and then set BoltWeb. |  Image Removed Image Added
|
| 6 | 🖱️ Click the three-dots icon on the Flange Bolt Property cell, and then set BoltFla. |  Image Removed Image Added
|
| 7 | 🖱️ Keep the Show Bolts(Detailing) as default. |  Image Removed Image Added
|
| 8 | 🖱️ Return to the Girder category and set name as Splice1. |  Image Removed Image Added
|
| 9 | 🖱️Enter the Station as 118.7. |  Image Removed Image Added
|
| 10 | 🖱️Enter the Gap Between Girders as 0. |  Image Removed Image Added
|
| 11 | 🖱️ Keep the Web Weld Size and Web Weld Clearance as default. |
| 12 | You can edit the Web Splice dimensions of Bolted Field Splice from Web Splice tab.
🖱️ Please set the following parameter values: Plate Thickness : 0.3125 # of Bolts (Horz.) : 2 # of Bolts (Vert.) : 17 Bolt Spacing (Horz.) : 3 Bolt Spacing (Vert.) : 4.75 Bolt Spacing @ Center : 4.5 Bolt Edge Distance (Horz.) : 2 Bolt Edge Distance (Vert.) : 1.75
|  Image Removed Image Added
|
| 13 | 🖱️ Click three-dots icon on Plate Material cells and select a Material as A709 50W. If you have reached this stage and you don't have a material to select, and if you want to use the Import Button, you can refer to the Quick Tip. |  Image Removed Image Removed Image Removed Image Added Image Added Image Added
|
| 14 | | Insert excerpt |
|---|
| _Quick Tips |
|---|
| _Quick Tips |
|---|
| name | ImportMaterial |
|---|
| nopanel | true |
|---|
|
|
| 15 | You can edit the Top Flange Splice dimensions of Bolted Field Splice from Top Flange Splice tab.
🖱️ Please set the following parameter values: Inner Plate Thickness : 0.6875 Outer Plate Thickness : 0.625 # of Bolts (Long.) : 3 # of Bolts (Trans.) : 2 Bolt Spacing (Long.) : 3 Bolt Spacing (Trans.) : 3 Bolt Spacing @ Center (Long.) : 3.75 Bolt Spacing @ Center (Trans) : 6 Bolt Edge Distance (Long.) : 2 Bolt Edge Distance (Trans.) : 1.5
|  Image Removed Image Added
|
| 16 | 🖱️ Click three-dots icon on Plate Material cells and select a Material as A709 50W. |  Image Removed Image Added Image Added Image Added
|
| 17 | You can edit the Bottom Flange Splice dimensions of Bolted Field Splice from Bottom Flange Splice tab.
🖱️ Please set the following parameter values: Inner Plate Thickness : 0.875 Outer Plate Thickness : 0.875 # of Bolts (Long.) : 6 # of Bolts (Trans.) : 2 Bolt Spacing (Long.) : 3 Bolt Spacing (Trans.) : 4 Bolt Spacing @ Center (Long.) : 3.75 Bolt Spacing @ Center (Trans) : 6 Bolt Edge Distance (Long.) : 2 Bolt Edge Distance (Trans.) : 2
|  Image Removed Image Added
|
| 18 | 🖱️ Click three-dots icon on Plate Material cells and select a Material as A709 50W. |  Image Removed Image Added Image Added Image Added
|
| 19 | When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM. |  |
| 20 | To model all the bolted field splices, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model. |