Content Comparison

🖱️ Click on Name cell and set name as SuperstrCCT.

Image Removed

Image Added

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the load combination table is define in the next step.

🖱️ Click the three-dots icon on the Load Combination Table cell, and then set SuperstructureLCT.

Image Removed

Image Added

🖱️ Keep the Check for, Include Haunch for Properties?, Mlat Comp. Method, Select State Provisions, Type of Construction , Check Deflection Criteria as per and Criteria for Deflection as default.

Image Removed

Image Added

You can edit the Fatigue parameters of Steel I Girder Code Check from Fatigue Parameters tab.

🖱️Enter the ADTT as 1250.

🖱️Enter the Number of lanes variable Lanes Available to trucks Trucks as 3.

Image Removed

Image Added

🖱️ Keep the Ductility parameters ,Appendix A6 parameters,Appendix B6 parameters as default.

Keep the Appendix B6 parameters as default.

Image Removed

Image AddedImage AddedImage Added

🖱️ Go to Deflection tab as default.

Define the Deflection Result Case with the option 'User Input.'

Then, choose the Deflection Result Case as 'LLDefCase,' keeping all other parameters set to their default values.

Image Added

Image Added

Image AddedImage Added