Versions Compared

Version Old Version 11 New Version Current
Changes made by

Umut Nuhat Sevinc

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Expand
titleRoadway
Roadway [SIG]
1

(blue star) 🖱️ Click the three-dots icon on the Bridge cell, and then set BRG1.

Image Removed

image-20240929-085316.pngImage Added

2

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the Roadway dimensions are set in the next step.

3

Insert excerpt
_Quick Tips
_Quick Tips
nameIssue
nopaneltrue

4

(blue star) 🖱️ Click three-dots icon on Roadway Dimensions and click Edit.

Image RemovedImage Removed

image-20240929-085400.pngImage Addedimage-20240929-085436.pngImage Added

5

(blue star)🖱️Enter the Station as 0.

Image Removed

image-20240929-085523.pngImage Added

6

(blue star) 🖱️ Keep the Transverse Offset as default.

7

(blue star)🖱️Enter the Right Width and Left Width as 18.

8

(blue star) 🖱️ Keep the Skew as default.

9

(blue star) 🖱️ Move to the second row.

(blue star)🖱️Enter the Station as 530.

10

(blue star) 🖱️ Keep the parameters of the Roadway 3D tab and the remaining parameters of the General tab as default.

image-20240929-085648.pngImage Added
11

Road dimensions may vary depending on the station.

You can refer to the Quick Tip below to see how to define road dimensions based on the station.

12

Insert excerpt
_Quick Tips
_Quick Tips
nameRoadwayDimensions
nopaneltrue

13

When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM.

14

Proceed to the next step to verify the model.

...

Insert excerpt
_Quick Tips
_Quick Tips
nameModelButton
nopaneltrue

...

Tip

To view the entire procedure explained on this page, please watch the recorded Video below.

...

Roadway.mp4