Versions Compared

Version Old Version 10 New Version Current
Changes made by

Umut Nuhat Sevinc

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

1

🖱️ Click on Name cell and set name as CFrameCCT.

Image Removed

image-20250121-074618.pngImage Added

2

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the load combination table is define in the next step.

3

Insert excerpt
_Quick Tips
_Quick Tips
nameIssue
nopaneltrue

4

🖱️ Click the three-dots icon on the Load Combination Table cell, and then set SuperstructureLCT.

Image Removed

image-20250121-074638.pngImage Addedimage-20250121-074651.pngImage Added

5

🖱️ Click the three-dots icon on the Check Gusset Plates cell, and then set YES.

Image Removed6

You can edit the Fatigue parameters of Cross Frame Code Check from Fatigue 🖱️Go to the Fatigue Parameters tab.

🖱️Enter theSet ADTTas 1250 to 1250 and Number of Lanes Available to Trucks to 3.🖱️Enter

Leave the Number of lanes available to trucks as 3.

Image Removed

rest of the parameters as default.

image-20250121-075019.pngImage Added

6

image-20250121-075110.pngImage Added Keep the parameters in the Tensile Resistance Parameters tab as default.

image-20250121-075207.pngImage Added

7

Proceed to the next step to verify the model.

...