Foundation walls are defined and drawn from this section.
...
Figure 1
→ Click the “Foundation Wall” button (Figure 1).
...
Figure 2
→ You will see the question in your AutoCAD command line (Figure 2). Enter the floor number at which the foundation wall to be generated.
...
Figure 3
→ Draw the foundation wall analytical line as the centerline of the foundation wall (Figure 3).
...
Figure 4
→ Select the material of the foundation wall and enter the thickness of the foundation wall in the spreadsheet (Figure 4).
→ Click the ”No Break Pts” button to add breakpoints. Click to the point where the breakpoint(s) to be added.
Once the foundation wall is divided into parts by breakpoints, the properties of each part such as thickness or offset values can be entered differently. To enter different thickness or offset value to foundation wall parts enter “,” between each value as illustrated in Figure 5.
...
Figure 5