...
Rail
Section: Assign a section to be used on rails.
Deck: Upon selecting the connected deck, the rail will be placed on top of it and the vertical elevation will be adjusted accordingly.
Start Station Option[Deck Start/Input]: If you want to automatically assign start station to the deck start, select 'Deck Start'. If rail starts at different locations along the PGL, choose 'Input'
End Station Option[Deck Start/Input]: If you want to automatically assign end station to the deck end, select 'Deck End'. If your rail ends at different locations along the PGL, choose 'Input'
Start Station: If the "Start Station Option" is defined as 'Input,' this column can be used to specify the rails' start station. Otherwise, this parameter will be marked as N/A (Not Applicable).
End Station: If the "End Station Option" is defined as 'Input,' this column can be used to specify the rails' end station. Otherwise, this parameter will be marked as N/A (Not Applicable).
Gauge Distance: The distance between the rails, also known as the gauge, can be adjusted using this parameter.
Transverse Offset: The offset value perpendicular to the PGL (Proposed Ground Level) can be specified for the rails.
Ballast
Ballast Height:
Ballast Shoulder:
Ballast Slope:
...
Sleeper
Sleeper Width:
Sleeper Depth:
Sleeper Thickness:
Sleeper Spacing: