| Info |
|---|
Please follow the instructions provided below to add F shape barriers to Right sides of the bridge. |
| 1 | Navigate to Superstructure Attachments > F Shape Barrier |  | |||||
| 2 | The F barrier will be defined on all decks, specifically on the right side of each deck. Click three-dots icon on Deck cell and set Span1. | ||||||
| 3 | Select the Orientation of the barrier for the right side as in the figure. |  | |||||
| 4 | Set the concrete Material of the barrier to Fc_3_2ksi_NoStiffness. |  | |||||
| 5 | Enter Start Transverse Location and End Transverse Location as Right. |  | |||||
| 6 | Navigate to Dimension tab at spreadsheet. |  | |||||
| 7 | Enter the dimension parameters as in the figure | ||||||
| 8 | To create F barriers for the 2nd and 3rd spans, please follow the previous steps and repeat them accordingly. Also enter the names of the F Shape Barriers as in the figure. |  | |||||
| 9 |
| ||||||
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| 1 | Navigate to F Shape Barrier under Superstructure Attachments on the tree view. |
| 2 | Copy F Shape Barrier, and Dimensions from model inputs and paste into OpenBrIM. |
| Tip |
|---|
The F Shape Barrier that have been created are illustrated below. |
...
...
| Anchor | ||||
|---|---|---|---|---|
|
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
F Shape Barrier | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
F Shape Barrier | Dimensions | ||||||||||
|
| ||||||||||