| Info |
|---|
Please follow the instructions provided below to create Internal Cross Frame code check |
| 1 | Navigate Templates for Code Check > Internal Cross Frame Code Check |  |
| 2 | For Internal Cross Frame code check, 1 Load Combination Tables must be defined. | |
| 3 | Click three-dots icon on Load Combination Table and set SuperstructureLCT. Since the Internal Cross Frame is a superstructure element, the appropriate Load Combination Table to assign would be "SuperstructureLCT". |  |
| 4 | Navigate to Bridge Parameters tab. |  |
| 5 | Enter data as follows: |
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| 1 | Navigate to Internal Cross Frame Code Check under Templates for Code Check on the tree view. |
| 2 | Copy Params and Design Parameters from model inputs and paste into OpenBrIM. |
| Tip |
|---|
The Internal Cross Frame Code Check have been created. |
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Internal Cross Frame Code Check | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Params | Bridge Parameters | ||||||||||
|
| ||||||||||