Versions Compared

Version Old Version 1 New Version Current
Changes made by

Zeynep Bayam

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor#DEEBFF

Follow the next steps to define the bolt properties of the web and flange splice bolts.

...

Go to Connections / Bolt Property on tree view.

...

...

Create 2 rows (1 for flange bolts, 1 for web bolts).

...

...

Info

After clicking on 'Superstructure> Connections> Bolted Field Splice' in the navigation treeview, follow the steps to define the Bolted Field Splice. You can use the collapsed documentation page below for more information on the explanations of each parameter.

Expand
titleBolted Field Splice
Bolted Field Splice [SIG]
1

🖱️ Click the three-dots icon on the Girder cell, and then set G1.

image-20250117-104148.pngImage Added

2

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the bolt property is set in the next step.

3

Insert excerpt
_

...

Quick Tips
_

...

Quick Tips
name

...

Issue
nopaneltrue

1
4

🖱️ Go to

Bolt Property under Connections on the tree view.2

Copy Geometric Properties, and Mechanical Properties from model inputs and paste into OpenBrIM.

Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor#DEEBFF

Follow the next steps to add the splice plates.

...

Go to Bolted Field Splice.

...

...

Enter the Station and Gap between girders.

...

...

Go to Web Splice tab to edit the plate and bolt inputs.

...

Go to Top Flange Splice tab to edit the plate and bolt inputs.

...

...

Go to Bottom Flange Splice tab to edit the plate and bolt inputs.

...

...

Go to Bolts tab and select Web Bolt & Flange Bolt Properties.

...

...

Expand
titleQuick Tip

Do not forget to assign the related material for each case.

...

Enable/disable the display of splice bolts by editing the Show Bolts parameter.

...

...

Activate the Detailing from Detailing icon at the upper mid of the page.

...

...

Expand
titleQuick Tip

It is recommended to disable Detailing when there is no need to display the details, such as bolt and bolt holes, to get a better performance experience.

...

Go to Bolted Field Splice under Connections on the tree view.

...

Copy Girder, Web Splice, Top Flange Splice, Bottom Flange Splice, and Bolts from model inputs and paste into OpenBrIM.

Tip

Completed deck bolted field splice is illustrated below.

...

Bolt Property

Geometric Properties

Code Block
BoltFla	0.875	1.4375	1	0.4688	0.7344
BoltWeb	0.875	1.4375	1.4375	0.4688	0.7344

Mechanical Properties

Code BlockBoltFla ASTM_F3125 A325 YES StandardHole Excluded ClassB BoltWeb ASTM_F3125 A325 YES StandardHole Included ClassB

the Bolt category.

Image Added

5

🖱️ Click the three-dots icon on the Web Bolt Property cell, and then set BoltWeb.

image-20250117-104227.pngImage Added

6

🖱️ Click the three-dots icon on the Flange Bolt Property cell, and then set BoltFla.

image-20250117-104314.pngImage Added

7

🖱️ Keep the Show Bolts(Detailing) as default.

image-20250117-104416.pngImage Added

8

🖱️ Return to the Girder category and set name as Splice1.

image-20250117-104441.pngImage Added

9

🖱️Enter the Station as 118.7.

image-20250117-104500.pngImage Added

10

🖱️Enter the Gap Between Girders as 0.

image-20250117-104524.pngImage Added

11

🖱️ Keep the Web Weld Size and Web Weld Clearance as default.

12

You can edit the Web Splice dimensions of Bolted Field Splice from Web Splice tab.
🖱️ Please set the following parameter values:

  • Plate Thickness : 0.3125

  • # of Bolts (Horz.) : 2

  • # of Bolts (Vert.) : 17

  • Bolt Spacing (Horz.) : 3

  • Bolt Spacing (Vert.) : 4.75

  • Bolt Spacing @ Center : 4.5

  • Bolt Edge Distance (Horz.) : 2

  • Bolt Edge Distance (Vert.) : 1.75

image-20250117-104619.pngImage Added

13

🖱️ Click three-dots icon on Plate Material cells and select a Material as A709 50W.

If you have reached this stage and you don't have a material to select, and if you want to use the Import Button, you can refer to the Quick Tip.

image-20250117-104644.pngImage AddedImage Addedimage-20250117-104718.pngImage Added

14

Insert excerpt
_Quick Tips
_Quick Tips
nameImportMaterial
nopaneltrue

15

You can edit the Top Flange Splice dimensions of Bolted Field Splice from Top Flange Splice tab.
🖱️ Please set the following parameter values:

  • Inner Plate Thickness : 0.6875

  • Outer Plate Thickness : 0.625

  • # of Bolts (Long.) : 3

  • # of Bolts (Trans.) : 2

  • Bolt Spacing (Long.) : 3

  • Bolt Spacing (Trans.) : 3

  • Bolt Spacing @ Center (Long.) : 3.75

  • Bolt Spacing @ Center (Trans) : 6

  • Bolt Edge Distance (Long.) : 2

  • Bolt Edge Distance (Trans.) : 1.5

image-20250117-104832.pngImage Added

16

🖱️ Click three-dots icon on Plate Material cells and select a Material as A709 50W.

image-20250117-104905.pngImage Addedimage-20250117-104919.pngImage Addedimage-20250117-104950.pngImage Added

17

You can edit the Bottom Flange Splice dimensions of Bolted Field Splice from Bottom Flange Splice tab.
🖱️ Please set the following parameter values:

  • Inner Plate Thickness : 0.875

  • Outer Plate Thickness : 0.875

  • # of Bolts (Long.) : 6

  • # of Bolts (Trans.) : 2

  • Bolt Spacing (Long.) : 3

  • Bolt Spacing (Trans.) : 4

  • Bolt Spacing @ Center (Long.) : 3.75

  • Bolt Spacing @ Center (Trans) : 6

  • Bolt Edge Distance (Long.) : 2

  • Bolt Edge Distance (Trans.) : 2

image-20250117-105041.pngImage Added

18

🖱️ Click three-dots icon on Plate Material cells and select a Material as A709 50W.

image-20250117-105059.pngImage Addedimage-20250117-105113.pngImage Addedimage-20250117-105127.pngImage Added

19

When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM.

Image Added

20

To model all the bolted field splices, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

Insert excerpt
_Quick Tips
_Quick Tips
nameCopyPasteInputs
nopaneltrue

Bolted Field Splice

Girder

Code Block
Splice1
G4
G1	118.
7
7000	0
Splice2 G4 206.7
.0000	0
Splice3 G4 335.7
.3125	0
Splice4 G4 464.7 0 Splice5 G3 116.9 0 Splice6 G3 203.6 0 Splice7 G3 330.6 0 Splice8 G3 417.3 0 Splice9 G2 115.1 0 Splice10 G2 200.4 0 Splice11 G2 325.4 0 Splice12 G2 410.7 0 Splice13 G1 113 0 Splice14 G1 197 0 Splice15 G1 320 0 Splice16 G1 404 0

Web Splice

Code Block
Splice1	0.3125	2	17	3	4.75	4.5	2	1.75	A709_50W
Splice2	0.3125	2	17	3	4.75	4.5	2	1.75	A709_50W
Splice3	0.3125	2	17	3	4.75	4.5	2	1.75	A709_50W
Splice4	0.3125	2	17	3	4.75	4.5	2	1.75	A709_50W
Splice5	0.3125	2	17	3	4.75	4.5	2	1.75	A709_50W
Splice6	0.3125	2	17	3	4.75	4.5	2	1.75	A709_50W
Splice7	0.3125	2	17	3	4.75	4.5	2	1.75	A709_50W
Splice8	0.3125	2	17	3	4.75	4.5	2	1.75	A709_50W
Splice9	0.3125	2	17	3	4.75	4.5	2	1.75	A709_50W
Splice10	0.3125	2	17	3	4.75	4.5	2	1.75	A709_50W
Splice11	0.3125	2	17	3	4.75	4.5	2	1.75	A709_50W
Splice12	0.3125	2	17	3	4.75	4.5	2	1.75	A709_50W
Splice13	0.3125	2	17	3	4.75	4.5	2	1.75	A709_50W
Splice14	0.3125	2	17	3	4.75	4.5	2	1.75	A709_50W
Splice15	0.3125	2	17	3	4.75	4.5	2	1.75	A709_50W
Splice16	0.3125	2	17	3	4.75	4.5	2	1.75	A709_50W

Top Flange Splice

Code Block
Splice1	0.6875	0.625	3	2	3	3	3.75	6	2	1.5	A709_50W
Splice2	0.6875	0.625	3	2	3	3	3.75	6	2	1.5	A709_50W
Splice3	0.6875	0.625	3	2	3	3	3.75	6	2	1.5	A709_50W
Splice4	0.6875	0.625	3	2	3	3	3.75	6	2	1.5	A709_50W
Splice5	0.6875	0.625	3	2	3	3	3.75	6	2	1.5	A709_50W
Splice6	0.6875	0.625	3	2	3	3	3.75	6	2	1.5	A709_50W
Splice7	0.6875	0.625	3	2	3	3	3.75	6	2	1.5	A709_50W
Splice8	0.6875	0.625	3	2	3	3	3.75	6	2	1.5	A709_50W
Splice9	0.6875	0.625	3	2	3	3	3.75	4	2	1.5	A709_50W
Splice10	0.6875	0.625	3	2	3	3	3.75	4	2	1.5	A709_50W
Splice11	0.6875	0.625	3	2	3	3	3.75	4	2	1.5	A709_50W
Splice12	0.6875	0.625	3	2	3	3	3.75	4	2	1.5	A709_50W
Splice13	0.6875	0.625	3	2	3	3	3.75	4	2	1.5	A709_50W
Splice14	0.6875	0.625	3	2	3	3	3.75	4	2	1.5	A709_50W
Splice15	0.6875	0.625	3	2	3	3	3.75	4	2	1.5	A709_50W
Splice16	0.6875	0.625	3	2	3	3	3.75	4	2	1.5	A709_50W

Bottom Flange Splice

Code Block
Splice1	0.875	0.875	6	2	3	4	3.75	6	2	2	A709_50W
Splice2	0.875	0.875	6	2	3	4	3.75	6	2	2	A709_50W
Splice3	0.875	0.875	6	2	3	4	3.75	6	2	2	A709_50W
Splice4	0.875	0.875	6	2	3	4	3.75	6	2	2	A709_50W
Splice5	0.875	0.875	6	2	3	4	3.75	6	2	2	A709_50W
Splice6	0.875	0.875	6	2	3	4	3.75	6	2	2	A709_50W
Splice7	0.875	0.875	6	2	3	4	3.75	6	2	2	A709_50W
Splice8	0.875	0.875	6	2	3	4	3.75	6	2	2	A709_50W
Splice9	0.875	0.875	6	2	3	3	3.75	4	2	1.75	A709_50W
Splice10	0.875	0.875	6	2	3	3	3.75	4	2	1.75	A709_50W
Splice11	0.875	0.875	6	2	3	3	3.75	4	2	1.75	A709_50W
Splice12	0.875	0.875	6	2	3	3	3.75	4	2	1.75	A709_50W
Splice13	0.875	0.875	6	2	3	3	3.75	4	2	1.75	A709_50W
Splice14	0.875	0.875	6	2	3	3	3.75	4	2	1.75	A709_50W
Splice15	0.875	0.875	6	2	3	3	3.75	4	2	1.75	A709_50W
Splice16	0.875	0.875	6	2	3	3	3.75	4	2	1.75	A709_50W

Bolts

Code BlockSplice1 BoltWeb BoltFla NO Splice2 BoltWeb BoltFla NO Splice3 BoltWeb BoltFla NO Splice4 BoltWeb BoltFla NO Splice5 BoltWeb BoltFla NO Splice6 BoltWeb BoltFla NO Splice7 BoltWeb BoltFla NO Splice8 BoltWeb BoltFla NO Splice9 BoltWeb BoltFla NO Splice10 BoltWeb BoltFla NO Splice11 BoltWeb BoltFla NO Splice12 BoltWeb BoltFla NO Splice13 BoltWeb BoltFla NO Splice14 BoltWeb BoltFla NO Splice15 BoltWeb BoltFla NO Splice16 BoltWeb BoltFla NO
.3750
Splice2	G1	206.7000	0.0000	0.3125	0.3750
Splice3	G1	335.7000	0.0000	0.3125	0.3750
Splice4	G1	464.7000	0.0000	0.3125	0.3750
Splice5	G2	116.9000	0.0000	0.3125	0.3750
Splice6	G2	203.6000	0.0000	0.3125	0.3750
Splice7	G2	330.6000	0.0000	0.3125	0.3750
Splice8	G2	417.3000	0.0000	0.3125	0.3750
Splice9	G3	115.1000	0.0000	0.3125	0.3750
Splice10	G3	200.4000	0.0000	0.3125	0.3750
Splice11	G3	325.4000	0.0000	0.3125	0.3750
Splice12	G3	410.7000	0.0000	0.3125	0.3750
Splice13	G4	113.0000	0.0000	0.3125	0.3750
Splice14	G4	197.0000	0.0000	0.3125	0.3750
Splice15	G4	320.0000	0.0000	0.3125	0.3750
Splice16	G4	404.0000	0.0000	0.3125	0.3750

Anchor
Photo
Photo

Tip

The completed bolted filed splices are illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.

Insert excerpt
_Quick Tips
_Quick Tips
nameModelButton
nopaneltrue

...

Tip

To view the entire procedure explained on this page, please watch the recorded Video below.

...