...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Follow the next steps to define construction of bridge components. |
...
...
Deck pouring and hardening are the states of deck construction stage and should be specified here.
...
Go to Deck Casting tab.
...
...
Specify names of the deck construction stages in Name.
...
Select pouring stages in Pouring Stage (Weight Only) and hardening stages in Hardening Stage (Gains Stiffness).
...
...
Select the deck to be constructed in the corresponding stage.
...
...
Go to the Longitudinal tab and specify the stations of deck pouring in the longitudinal direction.
...
...
Go to the Transverse tab and specify the stations of deck pouring in the transverse direction. This example includes a complete casting sequence. Therefore, Keep the Transverse Const. Type as Complete (as default).
...
...
From Loading/Construction/Superstructure, click Girder Erection (Complete).
...
...
Select Stage and Bridge.
...
Proceed with Superstructure Attachment Construction.
...
...
Name the cell.
...
Select Stage.
...
Go to Superstructure Attachment Elements and click on Pick.
...
...
Pick the barrier objects from 3D view. Then, click done after selection completed.
...
...
Go to Deck under Superstructure on the tree view.
...
Copy Deck Casting, Longitudinal and Transverse from model inputs and paste into OpenBrIM.
...
Go to Girder Erection (Complete) under Superstructure on the tree view.
...
Copy Girder Construction from model inputs and paste into OpenBrIM.
...
Go to Superstructure Attachment Construction under Superstructure on the tree view.
...
Copy General from model inputs and paste into OpenBrIM.
...
Deck
...
Deck Casting
| Code Block |
|---|
DeckCasting1 Cast1PourStage Cast123GainStiffStage Deck1 0 0
DeckCasting2 Cast2PourStage Cast123GainStiffStage Deck1 0 0
DeckCasting3 Cast3PourStage Cast123GainStiffStage Deck1 0 0
DeckCasting4 Cast4PourStage Cast45GainStiffStage Deck1 0 0
DeckCasting5 Cast5PourStage Cast45GainStiffStage Deck1 0 0 |
Longitudinal
| Code Block |
|---|
DeckCasting1 0 111
DeckCasting2 211 319
DeckCasting3 419 530
DeckCasting4 111 211
DeckCasting5 319 419 |
Transverse
| Code Block |
|---|
DeckCasting1 Complete N/A N/A N/A N/A
DeckCasting2 Complete N/A N/A N/A N/A
DeckCasting3 Complete N/A N/A N/A N/A
DeckCasting4 Complete N/A N/A N/A N/A
DeckCasting5 Complete N/A N/A N/A N/A |
...
Girder Erection(Complete)
...
Girder Construction
| Code Block |
|---|
GCC1 GirderStage BRG1 |
...
Superstructure Attachment Construction
General
...
| Info |
|---|
After clicking on ‘Construction> Superstructure Construction> Girder/Cross Frame Erection' in the navigation treeview, follow the steps to define the Girder/Cross Frame Erection. You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| Expand | ||
|---|---|---|
| ||
| Girder Erection (Complete) [SIG] |
| 1 | 🖱️ Click three-dots icon on Stage cell and select a Construction Stage as GirderStage. |
| ||||||||||
| 2 | As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the bridge is define in the next step. |  | ||||||||||
| 3 |
| |||||||||||
| 4 | 🖱️ Click the three-dots icon on the Bridge cell, and then set BRG1. |
| ||||||||||
| 5 | 🖱️ Keep the Splice Load and Stiffener/Gusset Plate Load and Girder Self Weight Factor as default. |
| ||||||||||
| 6 | Proceed to the next step to verify the model. | |||||||||||
| Anchor | ||||
|---|---|---|---|---|
|
| Tip |
|---|
The completed girder/cross frame erection is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips. |
...
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |
...