Creating custom pile templates is by this section.
...
→ Click the “Pile Cap Edge” button and draw the pile cap geometry under the columns or shear walls (Figure 2).
...
Figure 2
...
Figure 3
→ Select the concrete and rebar material of the custom pile cap and enter the properties such as cap depth, pile diameter, etc. in the spreadsheet (Figure 3).
...
Figure 4
→ Click the “Show” button to go to the "piles spreadsheet" of the custom pile cap (Figure 4).
...
Figure 5
→ Click the “Piles" button (Figure 5) to add piles to the custom pile cap. Enter the center point of the pile (Figure 6).
...
Figure 6
→ Enter the properties such as capacities of each pile (Figure 7).
...
Figure 7