Custom Creating custom pile cap templates are created from is by this section.
...
Figure 1
→ Click Pile the “Pile Cap Edge Edge” button and draw the pile cap geometry under the columns or shear walls as demonstrated in (Figure 2).
...
Figure 2
...
Figure 3
→ Select the concrete and rebar material of the custom pile cap and enter the properties such as cap depth, pile diameter, etc. in the spreadsheet as shown in (Figure 3).
...
Figure 4
→ Click Show the “Show” button to go to the "piles spreadsheet" of the custom pile cap as demonstrated in (Figure 4).
...
Figure 5
→ Click Pile button as illustrated in the “Piles" button (Figure 5) to add piles to the custom pile cap. Enter the center point of the pile as shown in (Figure 6).
...
Figure 6
→ Enter the properties such as capacities of each pile as demonstrated in (Figure 7).
...
Figure 7