...
There is two way of creating layered rebar templates.
First way;
→ Click Create New Template cell of Show Layered Rebar Templates column of desired analytical beam in the spreadsheet as illustrated in Figure 3.
...
→ Enter leg number
→ Click Reinforcements button shown in Figure 4 to go back to reinforcements spreadsheet
→ Click Show to add rebar layers
Show button will open the longitudinal reinforcement spreadsheet as illustrated in Figure 5
...
Figure 5
→ Click Add to add rebar layer
→ Select rebar of the layer in the spreadsheet
→ Enter rebar count along the layer in the spreadsheet
→ Enter distance to extreme fiber in the spreadsheet
→ Select the layer location in the spreadsheet
→ Click Reinforcements button shown in Figure 4 Back To Rebar Template button to go back to previous spreadsheet
Second way;
...
Figure 6
→ Go to Layered Rebar Template spreadsheet
→ Click Add to create rebar template
...
Figure 7
→ Select transverse reinforcement number in the spreadsheet
→ Enter clear cover to stirrup in the spreadsheet
→ Enter transverse spacing in the spreadsheet
→ Enter the leg number in y direction in the spreadsheet
→ Click Show cell of the rebar layers column in the spreadsheet
Show button will open longitudinal reinforcement spreadsheet.
...
Figure 8
→ Click Add to add rebar layer
→ Select rebar of the layer in the spreadsheet
→ Enter rebar count along the layer in the spreadsheet
→ Enter distance to extreme fiber in the spreadsheet
→ Select the layer location in the spreadsheet
→ Click Back To Rebar Template button to go back to reinforcements previous spreadsheet
...