Problem Description
...
| Output Parameter | OpenBrIM | SAP2000 | Independent | Percent Difference (SAP2000 vs Independent) | Percent Difference (OpenBrIM vs Independent) |
|---|---|---|---|---|---|
| Uz(jt49) ft | -0.3072 | -0.3068 | -0.3086 | -1% | 0.47% |
Thin Plate Option – Axial Deformations at Support
| Angle | Output Parameter | OpenBrIM | SAP2000 | Independent | Percent Difference (SAP2000 vs Independent) | Percent Difference (OpenBrIM vs Independent) |
|---|---|---|---|---|---|---|
| 0 | Uy(jt1) ft | 3e-5 | 0.0000 | 0.0004 | -3% | 92.50% |
| 6.67 | Uy(jt2) ft | 0.0005 | 0.0005 | 0.0010 | -4% | 50.00% |
| 13.33 | Uy(jt3) ft | 0.0018 | 0.0018 | 0.0021 | -2% | 14.29% |
| 20 | Uy(jt4) ft | 0.0029 | 0.0029 | 0.0030 | -1% | 3.33% |
| 26.67 | Uy(jt5) ft | 0.0024 | 0.0024 | 0.0021 | 2% | -14.29% |
| 33.33 | Uy(jt6) ft | -0.0017 | -0.0017 | -0.0025 | -6% | 32.00% |
| 40 | Uy(jt7) ft | -0.0118 | -0.0118 | -0.0125 | -6% | 5.60% |
Thin Plate Option – Twisting Moments at Support
| Angle | Output Parameter | OpenBrIM | SAP2000 | Independent | Percent Difference (SAP2000 vs Independent) | Percent Difference (OpenBrIM vs Independent) |
|---|---|---|---|---|---|---|
| 0 | Uz(jt43) ft | 0.0463 | 0.046 | 0.048 | -1% | 3.54% |
| 6.67 | Uz(jt44) ft | 0.0309 | 0.031 | 0.028 | +1% | -10.36% |
| 13.33 | Uz(jt45) ft | -0.0131 | -0.013 | -0.015 | -1% | 12.67% |
| 20 | Uz(jt46) ft | -0.0786 | -0.078 | -0.080 | -1% | 1.75% |
| 26.67 | Uz(jt47) ft | -0.1556 | -0.155 | -0.157 | -1% | 0.89% |
| 33.33 | Uz(jt48) ft | -0.234 | -0.234 | -0.240 | -2% | 2.50% |