...
Figure 9.7
→ Click Draw Stirrup as button shown in Figure 9.7 and draw the stirrup line through longitudinal reinforcement centers.
...
→ Click Group X Rebars / Group Y Rebars shown in Figure 9.7to group reinforcements in directions
→ Select shear reinforcements as shown in Figure 9.9
...
Figure 9.9
→ Click Closed Torsional Rebar button shown in Figure 9.7
→ Select shear reinforcements for torsion as shown in Figure 9.10
...
Figure 9.10
Shear reinforcement legs selected for torsion will have T letter near by it as illustrated in Figure 9.11.
...
Figure 9.11
...
Tributary Area
Tributary area of the column at each floor in the design line is listed in this spreadsheet
...