Foundation walls are defined and drawn from this section.
...
| userGroups | Turkish |
|---|
...
.
...
Figure 1
→ Click Foundation Wall button as shown in Figure 1.
...
...
Temel duvarı çizmek için Figure 1’deki butona tıklanır.
...
Figure 2
→ Enter the floor number which the foundation wall will be drawn to AutoCAD command line as demonstrated in Figure 2.
...
Figure 3
→ Draw the foundation wall analytical line (center line of the foundation wall) as illustrated in Figure 3.
...
Figure 4
→ Select the material of the foundation wall and enter the thickness of the foundation wall in the spreadsheet as shown in Figure 4.
→ Click No Break Pts button to add break points. Click to the point where break point to be added.
Once the foundation wall is divided into parts by break points, propeties of each part such as thickness or offset values can be entered differently. To enter different thickness or offset value to foundation wall parts enter “,” between each value as illustrated in Figure 5.
...
Figure 5
| Show if | ||
|---|---|---|
| ||
Figure 2’de görülen AutoCAD komut satırına temel duvarı çizilmek istenen kat girilir ve sonrasında çizim yapılır. |
...
| userGroups | Turkish |
|---|
...