...
Column Design Line Data
...
Figure 2
Assigned analysis source, code check template, demand/capacity ratio , analysis source datas are displayed in this spreadsheet as illustrated in Figure 2.
→ Click Show to see the detailed report of the column at each floorin the spreadsheet as illustrated in Figure 3.
...
Figure 3
Column section and rebar detailing defined by user at each floor are displayed in drawing space as demonstrated in Figure 3.
...
→ #of rebar along width/depth data must be entered for rectangular columns
→ Rebar count must be entered for circular columns
Rebar definitions of abitrary columns are made in rebar templates spreadsheet.
...
Figure 5
Rebar detailings in the section drawings will be updated according to the entered data as illustrated in Figure 5.
...
→ Clear cover to stirrup must be entered in this spreadsheet as demonstrated in Figure 8.
Rebar Templates
**must be updated.
...
Reinforcement detailings of arbitrary columns are defined from this spreadsheet.
...
Figure 9.1
→ Click Draw Rebars
...
Figure 9.2
→ Enter the clear cover + diameter of the stirrup+ diameter of the longitudinal reinforcement/2 value as shown in Figure 9.2.
Then the area where the reinforcements can be distributed will be generated as illustrated in Figure 9.3.
...
Figure 9.3
→ Click to where the reinforcements will be located as demonstrated in Figure 9.4.
...
Figure 9.4
→ Select the longitudinal reinforcement in the spreadsheet as demonstrated in Figure 9.5.
...
Figure 9.5
→ Click Show Rebars to go to longitudinal reinforcements spreadsheet as shown in Figure 9.6.
...
Figure 9.6
User can edit the diameter of each reinforcement from the spreadsheet shon in Figure 9.6
→ Click Back to Rebar Template to go back
→ Click Show Stirrups as shown in Figure 13 to go to stirrup reinforcements spreadsheet as shown in Figure 9.7.
...
Figure 9.7
→ Click Draw Stirrup as shown in Figure 9.7 and stirrup line through longitudinal reinforcements.
→ Hit ESC to finish drawing
...
Figure 9.8
Strirrup center line will automatically generated as illustrated in Figure 9.8.
→ Click Group X Rebars / Group Y Rebars shown in Figure 9.7to group reinforcements in directions
→ Select reinforcements as shown in Figure 9.9
...
Figure 9.9
Tributary Area
Tributary area of the column at each floor in the design line is listed in this spreadsheet
...