...
Adding AEC|BOLT ETABS Plugin
Connecting to Building Platform Library to “Pull” the model into ETABS
Analyzing the model in ETABS
Connecting to Building Platform Library to “Push” the model into BDS
Adding AEC|BOLT ETABS Plugin:
Connecting to Building Platform Library
...
;
...
Figure X11
→ Go to Tools then click AEC | BOLT link to connect the Building Design Suite Library as shown in Figure X11.
...
Figure X22
→ Click YES to the pop up warning demonstrated in Figure X22.
A pop up window of AEC | BOLT Building Design Suite platform will open.
...
Figure X33
Log in with your AEC | BOLT Building Design Suite account as illustrated in Figure X33. After log in you will be directed to your library.
...
Figure X44
→ Click on the project which to be transferred to Etabs.
...
Figure X55
→ Click 3D view to see the 3D model of the building as illustrated in Figure 5.
→ Click Finite View to see the analytical model of the building as illustrated in Figure 6.
The finite model generated by AEC | BOLT Building Design Suite will be transferred to etabs for analysis. You can easily re-generate the finite model if the generated model is not accurate for analysis (for example if not updated after the changes in 3D model). See FE Model page.
...
Figure 6
→ Click Pull to transfer the model to etabs.
...
Figure 7
Run analysis. Then click Push button to import the analysis results to AEC | BOLT Building Design Suite.