Custom pile cap templates are created from this section.
...
Figure 1
→ Click Pile Cap Edge button and draw the pile cap geometry under the columns or shear walls as demonstrated in Figure 2.
...
Figure 2
...
Figure 3
→ Select the concrete and rebar material of the custom pile cap and enter the properties such as cap depth, pile diameter etc. in spreadsheet as shown in Figure 3.
...
Figure 4
→ Click Show button to go to piles spreadsheet of custom pile cap as demonstrated in Figure 4.
...
Figure 5
→ Click Pile button as illustrated in Figure 5 to add piles to custom pile cap. Enter the center point of pile as shown in Figure 6.
...
Figure 6
→ Enter the properties such as capacities of each pile as demonstrated in Figure 7.
...