| Show if | ||
|---|---|---|
| ||
Döşeme alt donatısı bu sekmeden tanımlanır. |
Bottom rebar is assigned Slab bottom reinforcement design is made in this section.
...
Figure 1
Uniform Reinforcements
Click “Custom Custom Zone Uniform Reinf. ” button as shown in Figure 1 to draw a custom uniform reinforcement region in slab.
Click “Select Select Slab For Uniform Reinf.” button as shown in Figure 1 and select slab edge or slab piece to assign as uniform reinforcement region.
| Show if | ||
|---|---|---|
| ||
Düzenli donatı alanı iki şekilde tanımlanabilir. Firgure 1’de görülen “Custom Zone Uniform Reinf.” butonuna tıklanarak döşemenin bir kısmında düzenli olan donatılar için alan çizilebilir ya da “Select Slab For Uniform Reinf.” butonuna tıklanarak tüm döşeme boyunca düzenli donatı tanımlanabilir. |
...
Figure 2
Click Show cell in spreadsheet to select the uniform reinforcement region in AutoCAD as demonstrated in Figure 2.
Click N/Showing Additional Rebar Zones button as shown in Figure 1 to draw non uniform reinforcement. Click “Draw Region” button as shown in Figure 2 to draw region for non uniform reinforcement.
| Show if | ||
|---|---|---|
| ||
Figure 1’de görülen “Draw Slab Reinf.” butonuna tıklanarak düzenli olmayan donatılar çizilebilir. Figure 2’de görülen “Draw Region” butonuna tıklanarak çizilen donatıya bölge çizilebilir. Çizilen bölgelere Figure 2’de gösterildiği gibi donatı bilgisi girilmelidir. |
...
Figure 2
Enter rebar data to rebar regions as illustrated in Figure 2.see the extra reinforcement demand regions in slab plan as illustrated in Figure 3.
...
Figure 3
Select rebar number and enter the spacing data of reinforcement layers.
Additional Reinforcements
...
Figure 4
Additional reinforcements to uniform reinforcement regions are added from this spreadsheet.
Click Draw Slab Reinf. to draw rebar. Additional rebars must be drawn from support face to support face and in order to calculate the contribution of additional reinforement to capacity rebar region should be drawn.
...
Figure 4
Click Draw Region cell to draw the effective region of additional rebar.
Enter spacing, rebar number and rebar count data in the spreadsheet as illustrated in Figure 4.
Inregrity Bottom Bar
...
Figure 5
Integrity bottom reinforcements for punching shear are added from this spreadsheet.
Select bar diameter and code check template for inregrity bottom bar. See
...