...
Custom pile cap templates are created from this section.
...
Figure 1
Click “Pile Cap Edge“ to draw custom pile cap. Pile cap drawing must be larger than column as shown Pile Cap Edge button and draw the pile cap geometry under the columns or shear walls as demonstrated in Figure 2.
| Show if | ||
|---|---|---|
| ||
Stories içinde kolon çizildikten sonra Pile Cap Edge çizilebilir. Figure 2’de kolon içinde kalacak şekilde Pile Cap Edge çizilmiştir. |
Figure 2
Click “Pile“ to add piles to the pile cap. Pile cap and pile properties as illustrated in Figure 3 can be edited later .
| Show if | ||
|---|---|---|
| ||
Kolonu içine alacak şekilde Pile Cap Edge çizildikten sonra Şekil-1’de görülen Pile butonuna basılarak Pile Cap Edge içine Pile’lar çizilebilir. Daha sonra Şekil-3’te görüldüğü gibi Pile veya Pile Cap’in property’leri güncellenebilir. |
...
Figure 2
...
Figure 3
Select the concrete and rebar material of the custom pile cap and enter the properties such as cap depth, pile diameter etc. in spreadsheet as shown in Figure 3.
...
Figure 4
Click Show button to go to piles spreadsheet of custom pile cap as demonstrated in Figure 4.
...
Figure 5
Click Pile button as illustrated in Figure 5 to add piles to custom pile cap. Enter the center point of pile as shown in Figure 6.
...
Figure 6
Enter the properties such as capacities of each pile as demonstrated in Figure 7.
...
Figure 7