Content Comparison

The loads can be applied to the selected bearing by defining the related parameters below.

Bearing Load

Bearing: Specify the bearing at which the load will be applied.

Stage: Specify the stage at which the bearing load will be applied.

Fx: Specify the force applied in elements local X-axis direction.

Fy: Specify the force applied in elements local Y-axis direction.

Fz (Gravity): Specify the force applied in elements local negative Z-axis direction.

Mx: Specify the moment applied around the X-axis.

My: Specify the moment applied around the Y-axis.

Mz: Specify the moment applied around the Z-axis.

Info

Loads are applied taking into account bearing rotation angle The loads defined using for the Bearing Load object bearings are applied based on the global ( alignment ) coordinate system . If the rotation angle parameter of the bearing is nonzero, the longitudinal and transverse directions will adjust accordingly. Image RemovedImage RemovedImage RemovedImage RemovedImage Removed for the bearing that has the bearing rotation parameter set to zero degrees. Image AddedImage AddedImage AddedImage AddedImage Added