Versions Compared

Version Old Version 5 New Version Current
Changes made by

Melis Ceylan

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Info

After clicking on ‘Loading> Loads> Wind Load> Wind Load on Live Load> Lane Position' in the navigation treeview, follow the steps to define the Lane Position. You can use the collapsed documentation page below for more information on the explanations of each parameter.

Expand
titleLane Position
Lane Position [SIG]
1

🖱️ Click the three-dots icon on the Bridge cell, and then set BRG1.

2

🖱️ Keep the Start Station as default.

3

🖱️Enter the End Station as 530.

4

🖱️Enter the Transverse Offset as -11.

5

Insert excerpt
_Quick Tips
_Quick Tips
nameTransverseOffsetDefinition
nopaneltrue

6

To model all the lane position, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

Insert excerpt
_Quick Tips
_Quick Tips
nameCopyPasteInputs
nopaneltrue

Lane Position

Geometry

Code Block
LP1	BRG1	0.0000	530.0000	-11.0000
LP2	BRG1	0.0000	530.0000	0.0000
LP3	BRG1	0.0000	530.0000	11.0000

Anchor
Photo
Photo

Tip

The completed lane positions are illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.

Tip

To view the entire procedure explained on this page, please watch the recorded Video below.

20231018164928Lane Position.mp4