Versions Compared

Version Old Version 7 New Version 8
Changes made by

Melis Ceylan

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

1

🖱️ Click three-dots icon on Stage cell and select a Construction Stage as LLStage.

image-20240930-101208.pngimage-20240930-101247.png
2

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the roadway is define in the next step.

3

Insert excerpt
_Quick Tips
_Quick Tips
nameIssue
nopaneltrue

4

🖱️ Click the three-dots icon on the Roadway cell, and then set R1.

image-20240930-101403.png

5

🖱️ Keep the Live Load Category, Unit Load Spacing Long. and Unit Load Spacing Trans. and Direction as default.

image-20240930-101454.png

6

🖱️ Keep the Centrifugal parameters as defaultthe parameters of the remaining tabs set to their default values.

7

🖱️ Set name as ISGravity.

image-20240930-101531.png

8

To model all the influence surface, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

Insert excerpt
_Quick Tips
_Quick Tips
nameCopyPasteInputs
nopaneltrue

Influence Surface

General

Code Block
ISGravity	LLStage	R1	Gravity	360.0000	72.0000	Along PGL
ISBraking	BRStage	R1	Braking	360.0000	72.0000	Along PGL
ISCentr	CentStage	R1	Centrifugal	360.0000	72.0000	Along PGL

Centrifugal

Code Block
ISGravity	N/A	N/A
ISBraking	N/A	N/A
ISCentr	51.3000	Other than Fatigue(1.33)

Influence Surface

Braking

Code Block
ISGravity	N/A
ISBraking	Bidirectional
ISCentr	N/A

Settings

Code Block
ISGravity	0.0001
ISBraking	0.0001
ISCentr	0.0001

Anchor
Photo
Photo

Tip

The completed influence surfaces are illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.

...