...
| 1 | 🖱️ Click three-dots on the first cell of the Substructure and pick the pier columns PierColumn1, PierColumn2, PierColumn3 and PierColumn4 |   | ||||||||||
| 2 | 🖱️Enter the Footing Width as 44. |  | ||||||||||
| 3 | 🖱️Enter the Footing Length as 20. |  | ||||||||||
| 4 | 🖱️Enter the Thickness as 6. |  | ||||||||||
| 5 | 🖱️ Keep the Longitudinal Offset and Transverse Offset as default. If you want to examine the working logic of the Transverse Offset and Longitudinal Offset parameters in the Foundation object, you can refer to the Quick Tip below. |  | ||||||||||
| 6 |
| |||||||||||
| 7 | 🖱️ Click the three-dots icon on the Material cell, and then select Fc_4ksi.
If you have reached this stage and you don't have a material to select, and if you want to use the Import Button, you can refer to the Quick Tip. |    | ||||||||||
| 8 |
| |||||||||||
| 9 | 🖱️ Keep the Rotation as default. |  | ||||||||||
| 10 | 🖱️ Keep the FEM parameters as default. | 
| ||||||||||
| 11 | 🖱️ Set name as Footing1. | 
| ||||||||||
| 12 | When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM. |  | ||||||||||
| 13 | To model all the rectangular foundation, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model. | |||||||||||
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |
...