Versions Compared

Version Old Version 21 New Version 22
Changes made by

Melis Ceylan

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

1

🖱️ Click the three-dots icon on the Girder cell, and then set G4 G1.

2

🖱️Enter the Start Station as 1.975.

3

🖱️Enter the End Station as 73.

4

Start and End Station parameters of the Shear Stud should take into account skew angle.
You can refer to the Quick Tip below to review the calculations.

5

Insert excerpt
_Quick Tips
_Quick Tips
nameStationCalculateforSkewAngle
nopaneltrue

6

You can edit the dimensions of Shear Stud from Shear Stud tab.
🖱️ Keep the Diameter, Shear Stud In-Place Height, Shear Stud Head Thickness, Number of Segments Used to Draw the Bolt and Show Studs as default.

🖱️Enter the No. of Studs per Row as 3.
🖱️Enter the Spacing of Studs in Row as 4.
🖱️Enter the Spacing between Rows as 6.

7

 You can enable/disable display the detailing of shear studs by editing Show Studs as in splice spreadsheet.

8

When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM.

9

To model all the shear studs, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

...