Versions Compared

Version Old Version 27 New Version Current
Changes made by

Melis Ceylan

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

1

🖱️ Click the three-dots icon on the Girder cell, and then set G1.

Image Removed

image-20250116-134124.pngImage Added

2

🖱️Enter the Station as 130.2414.

Image Removed

image-20250116-134200.pngImage Added

3

🖱️ Keep the Skew Angle and Side of Web as default.

4

🖱️ Click three-dots icon on Material cells and select a Material as A709 50W.

If you have reached this stage and you don't have a material to select, and if you want to use the Import Button, you can refer to the Quick Tip.

Image RemovedImage RemovedImage Removed

image-20250116-134437.pngImage Addedimage-20250116-134452.pngImage Addedimage-20250116-134358.pngImage Added

5

Insert excerpt
_Quick Tips
_Quick Tips
nameImportMaterial
nopaneltrue

6

🖱️ Keep the Dimension, 3D Detailing and FEM as default.

Image RemovedImage RemovedImage Removed

image-20250116-134539.pngImage Addedimage-20250116-134555.pngImage Addedimage-20250116-134625.pngImage Added

7

When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM.

8

To model all the Transverse Stiffener, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

...

Insert excerpt
_Quick Tips
_Quick Tips
nameModelButton
nopaneltrue

...

image-20250116-134022.pngImage Addedimage-20250116-133945.pngImage Addedimage-20250116-133910.pngImage Addedimage-20250116-133845.pngImage Added

Tip

To view the entire procedure explained on this page, please watch the recorded Video below.

...

TRansverse Stiff.mp4