...
| 1 | 🖱️ Click three-dots icon on Insertion Point cell and click Select. |
| ||||||||||
| 2 | 🖱️ Select Insertion Point as a IP1 and Click OK. |   | ||||||||||
| 3 |
| |||||||||||
| 4 | 🖱️ Keep the Tx as default. |  | ||||||||||
| 5 | 🖱️ Click the three-dots icon on the Ty and Tz cell, and then set Fixed. |
| ||||||||||
| 6 | 🖱️ Keep the Rx, Ry, Rz, Bearing Rotation and Transfer Forces to Substructure as default. |
| ||||||||||
| 7 | 🖱️ Keep the bearing’s name as default. | |||||||||||
| 8 | When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM. |  | ||||||||||
| 9 | To model all of the Bearing Fixitybearings, copy the data below and paste the parameters into the first cell in the OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model. | |||||||||||
...