...
Location: The location can be defined using the support lines previously created, which can be specified with this parameter.
OrientationFront/Back: This parameter specifies the orientation of the abutment. It can be used to define the directional placement of abutments, ensuring they align correctly with the overall bridge structure.
...
Wing Wall Type [Rectangular/Tapered]: The shape of the wing walls can be defined as either Rectangular or Tapered, which can be specified using this parameter.
Right Left Wing Wall Length: The length of the right left wing wall in the longitudinal direction (when looking upstation along PGL) in the longitudinal direction can be adjusted using this parameter.
Right Left Wing Wall Thickness: The thickness of the right left wing wall in the transverse direction (when looking upstation along PGL) in the transverse direction can be adjusted using this parameter.
Right Left Wing Wall Angle: The angle of the right left wing wall (when looking upstation along PGL) can be defined using this parameter.
Left Right Wing Wall Length: The length of the left right wing wall in the longitudinal direction (when looking upstation along PGL) in the longitudinal direction can be adjusted using this parameter.
Left Right Wing Wall Thickness: The thickness of the left right wing wall in the transverse direction (when looking upstation along PGL) in the transverse direction can be adjusted using this parameter.
Left Right Wing Wall Angle: The angle of the left right wing wall (when looking upstation along PGL) can be defined using this parameter.
Tapered Length Start (Offset from Top)Wing Wall Short Depth: The depth starting from the top section of the tapered wing walls can be defined using this parameter. For a visual representation of this parameter, refer to the screenshot provided below.
Tapered Wing Wall Bottom Short Length: The length of the bottom side of the tapered wing wall can be specified using this parameter.
...