Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

For this object to be utilized, the model must have completed the analysis and successfully passed the design process, as this object will use the data obtained from the analysis and extract the results of the design.

Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor#FFFAE6

This report cannot be accessed through the DOCS button in the left sidebar, as it is not like other reports and requires the successful completion of analysis and design before it can be generated.

To access the Girder Camber Diagram:

image-20241130-120241.pngImage Addedimage-20241130-123540.pngImage Added

General

Girder: Choose a girder for the camber diagram.

Number of Result Extraction Stations [Ten Segment per Span/Twenty Segment per Span]:A camber model and diagram are generated using the deflections extracted for each span. If 10 is chosen, 10 deflection values will be extracted and utilized for each span.

PGL Correction (Yes/No)?:

Deflection Result Cases

Steel Dead Load:

Non-Composite Dead Load:

Composite Dead Load:

Additional Result Cases

...

A girder camber diagram can be generated based on three main result cases: Girder Dead Load, Deck Dead Load, and Superimposed Dead Load. The result extractions previously defined can be used to define these cases within this tab. The results from these cases can then be applied to calculate the deflection of the girder, which will be used to generate the camber diagram.

Girder Dead Load: Specify the result case for which the girders and cross frames are included, and the deflection of the girders will be calculated accordingly.

Deck Dead Load: To calculate the deflection of the girders based on the deck’s dead load, specify the relevant result case.

Superimposed Dead Load: Specify the result case for the superimposed dead loads, which are defined for the calculation of the deflection of the girders. The superimposed dead loads may include railings, signage, utilities, traffic barriers, and sidewalks as part of the result extraction case.

Number of Result Extraction Stations [Ten Segment per Span/Twenty Segment per Span]:A camber model and diagram are generated using the deflections extracted for each span. If 10 is chosen, 10 deflection values will be extracted and utilized for each span.

PGL Correction (Yes/No)?:

Additional Result Cases

For the cases under the Deflection Result Cases tab, the results will be presented. For additional cases, this tab can be used.

The results will be displayed with the column header defined by the "Description" parameter, and they will appear in the results table.

Result Case 1 Description:

Result Case 1:

...

Result Case 5 Description:

Result Case 5:

Info

Girder Camber Diagram Includes:

  • Result tables are provided for each span, including deflections based on the specified cases at varying stations.

image-20241130-124531.pngImage Added
  • Camber Diagram

image-20241130-124608.pngImage Added