Content Comparison

General

Template: The code check template is utilized to extract global parameters, results from finite element analysis, and limit states used in the design process.

Select Shaft: The modeled object, pile or shaft, used to perform design procedures can be specified using this parameter.

Soil Properties: The properties of the soil that will be used for design can be specified using this parameter.

General

• Depth of Soil (from foundation top):

• Soil Type:

• SPT Blow/ft:

• Saturated Unit Weight:

• Cohesion:

• Friction Angle:

• Uniaxial Compressive Strength:

• RQD:

Hoek-Brown Parameters

• GSI, Geological Strength Index:

• D, Disturbance Factor:

• m_i Constant:

Water Level:

Shear Parameters

Transverse Reinforcement Profile: Define the transverse reinforcement profile to be used in pile code checks.The profile can either be imported or selected from previously defined profiles under Properties → Rebars.

Transverse Reinforcement Material: Assign a material to the transverse reinforcements from previously defined materials under Properties → Materials, or import as needed.

Spacing of the Transverse Reinforcement [in]:No. : Specify the spacing between transverse reinforcements.

Number of Legs of Transverse Reinforcement [in]:: Specify the number of legs for the transverse reinforcements.