Versions Compared

Version Old Version 22 New Version 23
Changes made by

Melis Ceylan

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

From any cell of the AASHTO_TYPE_III_BEAM row, click on three-dots icon to open Section Editor panel.

Click + icon at the left top side of the screen.

And Select Rebar

Enter:

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Top

  • Dist. … Outer Surface of Rebar: 2

  • Outer Rebar Spacing: 4

  • Inner Rebar Spacing: 4

  • # of Rebars (per Row): 4

  • # of Rows: 1

Click Add.

Enter:

  • Profile: ASTMA615No8

  • Material: A615_60

  • Reference Edge: Bottom

  • Dist. … Outer Surface of Rebar: 2

  • Outer Rebar Spacing: 2

  • Inner Rebar Spacing: 2

  • # of Rebars (per Row): 8

  • # of Rows: 1

Click Add.

Click + icon at the left top side of the screen.

And Select Tendon

Enter:

  • Material: A416_270low_relaxation

  • Reference Edge: Bottom

  • Dist. …Ref Edge and CL Tendon: 4

  • Outer Tendon Spacing: 3

  • Inner Tendon Spacing: 4

  • Strand: Grade270_3_8_No9

  • Strand Count: 1

  • # of Tendon @ Row: 1 7

Click Add.

Enter:

  • Material: A416_270low_relaxation

  • Reference Edge: Bottom

  • Dist. …Ref Edge and CL Tendon: 6

  • Outer Tendon Spacing: 2.5

  • Inner Tendon Spacing: 2.5

  • Strand: Grade270_3_8_No9

  • Strand Count: 1

  • # of Tendon @ Row: 6

Click Add.

Enter:

  • Material: A416_270low_relaxation

  • Reference Edge: Bottom

  • Dist. …Ref Edge and CL Tendon: 6

  • Outer Tendon Spacing: 2.5

  • Inner Tendon Spacing: 2.5

  • Strand: Grade270_3_8_No9

  • Strand Count: 1

  • # of Tendon @ Row: 6

Click Add.

...