...
Stage: Specify the stage at which the bearing load will be applied.
Insertion Point: Select an insertion point to define the location of the loads.
Fx: Specify the force applied in the X-axis direction.
Fy: Specify the force applied in the Y-axis direction.
Fz: Specify the force applied in the Z-axis direction.
Mx: Specify the moment applied around the X-axis.
My: Specify the moment applied around the Y-axis.
Mz: Specify the moment applied around the Z-axis.
| Info |
|---|
Loads are applied according to Bearings Local Axis:taking into account bearing rotation angle The loads defined using the Bearing Load object are applied based on the bearing's local axis, which aligns with the global (alignment) coordinate system if . If the parameter "Bearing Rotation" under Superstructure-FEA Bearings is defined as zero. Otherwise, the loads will be applied based on the rotated axisrotation angle parameter of the bearing is nonzero, the longitudinal and transverse directions will adjust accordingly.   |