Excerpt | ||
---|---|---|
| ||
InputsPile Cap : Choose the pile cap to impose the nodal load on the top node of all piles. Individual Piles : Select individual piles to apply the nodal load on their top node. Stage : Select a stage to apply the load. Fx [kip] : Force in X direction. The longitudinal direction along the alignment will correspond to the X direction. Fy [kip] : Force in Y direction. The transverse direction along the alignment will correspond to the X direction. Fz [kip] : Force in Z direction. A positive value will apply the load in the gravity direction, while a negative value will apply the load in the opposite direction. Mx [kip-ft]: My [kip-ft]: Mz [kip-ft]:: Moment in the longitudinal direction along the PGL. My : Moment in the direction perpendicular to the PGL. Mz : Moment in the vertical direction.
|
Content Comparison
General
Content
Integrations