...

Modular Ratio Comp. Method [EsbyEc/User Input]:

Modular Ratio: If the Modular Ratio Comp. Method is defined with the option 'User Input,' a modular ratio can be defined manually. Otherwise, this parameter will be marked as not applicable (N/A).

Deck Reinforcement

Input Data Preference [Override Deck Rebar/Use Deck Rebar]:

Lumped Top Reinforcement Area within the Effective Width:

Distance from the CL of Top Bars to the Top of the Deck:

Lumped Bottom Reinforcement Area within the Effective Width:

Distance from the CL of Bottom Bars to the Bottom of the Deck:

Deck Rebar Material:

Concrete Creep Adjustment Factor:

Cover Plates

Cover plates are additional plates that are attached to the flanges of girders to enhance the flexural capacity of the girder over a certain section of the beam. The load rating object provides users with the option to add side and cover plates to the top or bottom flange. Section modulus and stress values will be calculated based on these inputs under live loads. However, actual girder plate dimensions will be used for other permanent loads.

...