Versions Compared

Version Old Version 10 New Version 11
Changes made by

Umut Nuhat Sevinc

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Expand
titlePier Cap Code Check
Concrete Pier Cap Code Check [SIG]
🖱️ Click the three-dots icon on the Shear Reinforcement Material cell, and then set
1

🖱️ Click the three-dots icon on the Pier Cap cell, and then set PierCap1.

Image Removedimage-20241005-103610.pngImage Added
2

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the code check template, pier cap section, transverse reinforcement profile, and shear reinforcement profile are defined in the next step.

Image Removedimage-20241005-103637.pngImage Added
3

Insert excerpt
_Quick Tips
_Quick Tips
nameIssue
nopaneltrue

4

🖱️ Click the three-dots icon on the Code Check Template cell, and then set PierCapCCT PierCapTemp1.

Image Removedimage-20241005-103732.pngImage Added

5

🖱️ Keep the Section Generation Method Change Code Check Loc (Dist. from Right End) to 10.

image-20241005-103911.pngImage Added

6

🖱️ Keep Design Section w Rebars (or Tendons) as default.

Image Removedimage-20241005-104027.pngImage Added

67

🖱️ Click three-dots icon on Override Section cell and select a Section as PierCapRec_Mid.

If you have reached this stage and you don't have a section to select, and if you want to use the Import Button, you can refer to the Quick Tip.

Image Removedimage-20241005-104123.pngImage AddedImage Removedimage-20241005-104201.pngImage Added7
Insert excerpt
_Quick Tips_Quick Tips
nameImportSection
nopaneltrue
8

🖱️ Click the three-dots icon on the Transverse Reinforcement Profile cell, and then set ASTMA615No5.

Image Removed
98

🖱️ Keep Shear Reinforcement Data as default.

image-20241005-104423.pngImage Added
9

🖱️Select Shear Reinforcement Profile as ASTMA615No5.

🖱️ Select Shear Reinforcement Material as A615_60.

Image Removedimage-20241005-104656.pngImage Added
10

🖱️ Enter theSet 6 for Spacing of the transverse reinforcement as 6.

Image Removed11

🖱️ Enter theShear Reinforcement.

🖱️ Set 2 for No. of Legs of Transverse Shear Reinforcementas 2.

Image Removedimage-20241005-104842.pngImage Added
1211

🖱️ Enter the Station of Section from Right End as 10.

Image Removed

13

🖱️ Keep the Check for For as default.

Image Removedimage-20241005-105132.pngImage Added
1412

🖱️ Set name as PierCapCC PierCapCC1.

Image Removedimage-20241005-105224.pngImage Added
1513

To model all the pier cap code check, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

...

Pier Cap Code Check

General

Code Block
PierCapCCPierCapCC1	PierCapCCTPierCapTemp1	PierCap1	User Input10.0000	Override Section	PierCapRec_Mid	User Input	ASTMA615No5	A615_60	6.0000	2.0000	10.0000	All
PCCC1PierCapCC2	PierCapCCT2PierCapTemp2	PierCap1	User Input10.0000	Override Section	PierCapRec_Mid	User Input	ASTMA615No5	A615_60	6.0000	2.0000	10.0000	All

Anchor
Photo
Photo

Tip

The completed pier cap code checks are illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.

...