Versions Compared

Version Old Version 8 New Version 9
Changes made by

Umut Nuhat Sevinc

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

1

🖱️ Click the three-dots icon on the Girder cell, and then set G4.

Image Removed

image-20241005-113225.pngImage Added

2

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the load rating template is defined in the next step.

3

Insert excerpt
_Quick Tips
_Quick Tips
nameIssue
nopaneltrue

4

🖱️ Enter the Station as 240.

Image Removedimage-20241005-113438.pngImage Added

5

🖱️ Click the three-dots icon on the Load Rating Template cell, and then set SIGLRT1.

Image Removed

image-20241005-113501.pngImage Addedimage-20241005-113515.pngImage Added

6

🖱️ Keep the Panel Type as default.

Image Removed

image-20241005-113536.pngImage Added

7

🖱️ Click the three-dots icon on the Modular Ratio Comp. Method cell, and then set EsbyEc.

Image Removed

image-20241005-113555.pngImage Addedimage-20241005-113626.pngImage Added

8

🖱️ Keep the Modular Ratio as default.

Image Removed

image-20241005-113642.pngImage Added

9

🖱️ Keep the Deck Reinforcement, Cover Plates and Section Losses parameters as default.

Image RemovedImage Removedimage-20241005-113736.pngImage Addedimage-20241005-113756.pngImage Addedimage-20241005-113811.pngImage Added
10

🖱️ Set name as LoadRatReport.

Image Removed

image-20241005-113837.pngImage Added

11

Proceed to the next step to verify the model.

...