| Info |
|---|
After clicking on ‘Loading> Loads> Surface Load' in the navigation treeview, follow the steps to define the Surface Load. You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| Expand | ||
|---|---|---|
| ||
| Surface Load [SIG] |
| 1 | 🖱️ Click the three-dots icon on the Surface cell, and then set LS1. |  | ||||||||||
| 2 | 🖱️ Click three-dots icon on Stage cell and select a Construction Stage as FutureWearingStage. |    | ||||||||||
| 3 | 🖱️ Keep the Fx and Fy as default. |  | ||||||||||
| 4 | 🖱️Enter the Fz as 0.03. |  | ||||||||||
| 5 | 🖱️ Keep the Mx, My and Mz as default. |  | ||||||||||
| 6 | 🖱️ Click the three-dots icon on the Element cell, and then set Deck. |  | ||||||||||
| 7 | 🖱️ Set name as FutureWearLoad. |  | ||||||||||
| 8 | When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the FEA view of OpenBrIM. You can refer to the Quick Tip below to learn how the loading displayed in the screenshot is viewed. |  | ||||||||||
| 9 |
| |||||||||||
| 10 | To model all the surface load, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model. | |||||||||||
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Surface Load | ||
|---|---|---|
General
|
| Anchor | ||||
|---|---|---|---|---|
|
| Tip |
|---|
The completed surface loads are illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips. |
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |