...
| 1 | 🖱️ Click the three-dots icon on the Influence Surface cell, and then set ISGravity. |
| ||||||||||
| 2 | 🖱️ Keep the Influence Surface 2, Influence Surface 3, Influence Surface 4 and Max for Stress Range as default. |
| ||||||||||
| 3 | 🖱️ Click three-dots icon on Multiple Presence Factor and click Edit. |
| ||||||||||
| 4 | 🖱️ Please enter the following values sequentially: |  | ||||||||||
| 5 | 🖱️ Keep the Maximum Number of Lanes as default. |
| ||||||||||
| 6 | You can edit the Design Lanes of live load case from Design Lanes tab. 🖱️ Click three-dots icon on Design Lane Option 1 cells and select a Design Lane as HL93AndLane_LL. If you have reached this stage and you don't have a design lane to select, and if you want to use the Import Button, you can refer to the Quick Tip. |    | ||||||||||
| 7 |
| |||||||||||
| 8 | 🖱️ Click three-dots icon on Design Lane Option 2 cells and select a Design Lane as HL93TandemTruckAndLane_LL. |
| ||||||||||
| 9 | 🖱️ Click three-dots icon on Design Lane Option 3 cells and select a Design Lane as HL93TwoTrucksAndLane_LL. |
| ||||||||||
| 10 | 🖱️ Keep the Design Lane Option 4 and Magnification Factors tabs parameters as default. |
| ||||||||||
| 11 | 🖱️ Set name as LLHL93Case. |
| ||||||||||
| 12 | To model all the live load case, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model. | |||||||||||
...