Versions Compared

Version Old Version 5 New Version 6
Changes made by

Umut Nuhat Sevinc

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Expand
titleLive Load Case
Live Load Case (Highway) [SIG]
1

🖱️ Click the three-dots icon on the Influence Surface cell, and then set ISGravity.

Image Removed

image-20240930-103620.pngImage Added

2

🖱️ Keep the Influence Surface 2, Influence Surface 3, Influence Surface 4 and Max for Stress Range as default.

Image Removed

image-20240930-103718.pngImage Added

3

🖱️ Click three-dots icon on Multiple Presence Factor and click Edit.

Image Removed

image-20240930-103658.pngImage Added

4

🖱️ Please enter the following values sequentially:
1st row - Factor: 1.2
2nd row - Factor: 1
3rd row - Factor: 0.85
4th row - Factor: 0.65

5

🖱️ Keep the Maximum Number of Lanesas default.

Image Removed

image-20240930-103807.pngImage Added

6

You can edit the Design Lanes of live load case from Design Lanes tab.

🖱️ Click three-dots icon on Design Lane Option 1 cells and select a Design Lane as HL93AndLane_LL.

If you have reached this stage and you don't have a design lane to select, and if you want to use the Import Button, you can refer to the Quick Tip.

Image Removedimage-20240930-103843.pngImage Added
7

Insert excerpt
_Quick Tips
_Quick Tips
nameImportDesignLane
nopaneltrue

8

🖱️ Click three-dots icon on Design Lane Option 2 cells and select a Design Lane as HL93TandemTruckAndLane_LL.

Image Removed

image-20240930-103930.pngImage Added

9

🖱️ Click three-dots icon on Design Lane Option 3 cells and select a Design Lane as HL93TwoTrucksAndLane_LL.

Image Removed

image-20240930-104003.pngImage Added

10

🖱️ Keep the Design Lane Option 4 and Magnification Factors tabs parameters as default.

image-20240930-104029.pngImage Added

Image Removed

image-20240930-104100.pngImage Added

11

🖱️ Set name as LLHL93Case.

Image Removed

image-20240930-104218.pngImage Added

12

To model all the live load case, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

...