Versions Compared

Version Old Version 3 New Version 4
Changes made by

Umut Nuhat Sevinc

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Expand
titleInfluence Surface
Influence Surface (Highway) [SIG]

1

🖱️ Click three-dots icon on Stage cell and select a Construction Stage as LLStage.

Image Removedimage-20240930-101208.pngImage AddedImage Removedimage-20240930-101247.pngImage Added
2

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the roadway is define in the next step.

3

Insert excerpt
_Quick Tips
_Quick Tips
nameIssue
nopaneltrue

4

🖱️ Click the three-dots icon on the Roadway cell, and then set R1.

Image Removed

image-20240930-101403.pngImage Added

5

🖱️ Keep the Live Load Category, Unit Load Spacing Long. and Unit Load Spacing Trans. and Direction as default.

Image Removed

image-20240930-101454.pngImage Added

6

🖱️ Keep the Centrifugal parameters as default.

7

🖱️ Set name as ISGravity.

Image Removed

image-20240930-101531.pngImage Added

8

To model all the influence surface, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

...