...
| 1 | 🖱️ Click three-dots icon on Stage cell and select a Construction Stage as GirderStage. | 
| ||||||||||
| 2 | As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the bridge is define in the next step. |  | ||||||||||
| 3 |
| |||||||||||
| 4 | 🖱️ Click the three-dots icon on the Bridge cell, and then set BRG1. | 
| ||||||||||
| 5 | 🖱️ Keep the Splice Load and Stiffeners Load Stiffener/Gusset Plate Load and Girder Self Weight Factor as default. | 
| ||||||||||
| 6 | Proceed to the next step to verify the model. | |||||||||||
...
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |
...