Content Comparison

→ To switch to the "FEA" tab located on the lower-left side, simply click on it.

Upon switching to the "FEA" tab, you will find a variety of FE results listed under the "Results" section of the tree-view.

→ Navigate to the "Node Reactions" option, either under the "Local" or "Global" category, based on your specific requirement.

On the “Data” spreadsheet, the results will be reported for:
i) result cases,
ii) construction stages
iii) result combinations/envelopes

To investigate the node reactions for a specific loading, you can utilize either the tabs and tree-view items in the spreadsheet,…

…or the drop-down menu. Both options allow you to navigate and explore the desired node reactions for the selected loading.

Under the FEA tab on the lower left sidebar:

→ Select "Element End Forces (External Local/Global)" from the tree view. This option allows you to visualize the FESpring results (displaying two nodes results for two-node springs) of the members based on the corresponding analysis results in the form of:

i) result cases,
ii) construction stages,
iii) result combinations/envelopes.

Image Added

After specifying the result case, construction stage, or result combination for which the results will be displayed, you can use the ‘Element’ columns filtering option.

Image Added

→ By using the pop-up window to set the filtering options, the results of springs will be visible in terms of Forces (X/Y/Z) and Moments (X/Y/Z) when such definitions, as illustrated in the image next to this row, are applied.

Image Added