Content Comparison

Inputs

Pier Cap: Choose the pier cap to impose the nodal load.

Stage: Select a stage to apply the load.

Distance From Right (relative): The relative distance where the load is applied.

Fx [kip]: Force in X direction. The longitudinal direction along the alignment will correspond to the X direction.

Fy [kip]: Force in Y direction. The transverse direction along the alignment will correspond to the X direction.

Fz [kip]: Force in Z direction. A positive value will apply the load in the gravity direction, while a negative value will apply the load in the opposite direction.

Mx [kip-ft]:

My [kip-ft]:

Mz [kip-ft]: