Content Comparison

🖱️ Click the three-dots icon on the Pier Cap cell, and then set PierCap1.

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the code check template, pier cap section, transverse reinforcement profile, and shear reinforcement profile are defined in the next step.

🖱️ Click the three-dots icon on the Code Check Template cell, and then set PierCapCCT.

🖱️ Keep the Section Generation Method as default.

🖱️ Click three-dots icon on Section cell and select a Section as PierCapRec_Mid.

If you have reached this stage and you don't have a section to select, and if you want to use the Import Button, you can refer to the Quick Tip.

🖱️ Click the three-dots icon on the Transverse Reinforcement Profile cell, and then set ASTMA615No5.

🖱️ Click the three-dots icon on the Shear Reinforcement Material cell, and then set A615_60.

🖱️ Enter the Spacing of the transverse reinforcement as 6.

🖱️ Enter the No. of Legs of Transverse Reinforcement as 2.

🖱️ Enter the Station of Section from Right End as 10.

🖱️ Keep the Check for as default.

🖱️ Set name as PierCapCC.