| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Follow the next steps to create a pile capacity code check. |
...
Name the row as PileCapacityCCT.
...
...
Select Load Combination Table as SubstructureLCT.
| Tip |
|---|
| Info |
After clicking on ‘Templates for Code Check and Load Rating> Pile Capacity Check' in the navigation treeview, follow the steps to define the Pile Capacity Check Template. You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| Expand | ||
|---|---|---|
| ||
| Pile Capacity Check T [SIG] |
| 1 |
|  | ||||
| 2 | As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the load combination table is define in the next step. |  | ||||
| 3 |
| |||||
...
| |||||
...
| ||||
...
| |||||
Go to Pile Capacity Check under Templates for Code Check and Load Rating on the tree view.
| 4 |
|  |
| 5 | Proceed to the next step to verify the model. | |
| Anchor |
|---|
...
|
...
|
...
Pile Capacity Check
General
...
| Tip |
|---|
The completed pile capacity check template is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips. |
...
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |
...